Exterior Car Parts

Thanks for visiting our site!
Jdm Civic
Checkout Ebay Auctions For The Cheapest Prices

Here are some more information for Jdm Civic:

The Megan racing header is a steel header that is made with T-304 grade stainless steel. Each Megan racing header offers Mandrel tool bent tubing and flanges from a CNC machine. All Megan racing header parts are tested to ensure fit and performance meet all standard goals, and each Megan racing header comes with a one year warranty. All Megan racing header is a replacement for any factory header on a vehicle. All Megan racing headers with the exception of the Acura Integra GSR all come with the outlet that bolts right up to the vehicle's factory exhaust pipes. The Megan racing header for the Acura listed above offers a two and a half inch JDM outlet for power. All other Megan racing header parts will bolt directly on, and none come with the exhaust manifold gasket. This is a recommended replacement when bolting on the new header.

These headers are available for the Dodge Neon for years of 1995 to 1999 with the DOHC trim. This is a 4 to 1 design that gives high power and a two and a half inch outlet that can be found for about $150 each. The Honda Civic is fitted for years of 2001 to 2004 with the EX trim and can be found for about $150. The Honda Accord is supported from years 1990 to 1993 and are available for $170. The one and only Infiniti model supported is the G35 from years 2002 to present. This model offers a 2.25 inch outlet with power gained due to the air flow being increased and can be found for about $330. The next most popular model of vehicle for this system is the Mitsubishi Eclipse for the years of 1995 to 1999, all non-turbo models. These will fit a 2.0 liter engine or a 420 A motor as well as an Eagle Talon. This model comes in two pieces with a 2.25 inch outlet and is a direct bolt on.

The Weapon R race header comes in a 4-2-1 configuration. The Weapon R race header offers long tubes design for the highest RPM flow, and stepped tubing for larger torque gains. The Weapon R race header is suggested for all racing vehicles, but is best for those that have high lift cams or high RPM rev bands. A two and a half inch collector for the high exhaust flow and the fact that this eliminates the need for the CAT makes it not legal in all 50 states. The Weapon R race header was made with years of research and development put into it including on the dynapack dyno. The Weapon R race header is only suggested for off road use as it is not legal on United States roads at this time, and the check engine light eliminator is recommended when using these headers. The Weapon R race header is available for only the B series of the Integra and is found for around $500, making it the most requested of all Weapon R race headers.

Megan Racing Header and Weapon R Race Header.

Suburban Grille – The Easy Way to Add Style to your Car

Chevrolet Suburban is one of the oldest brands in the U.S.A. Earlier it was manufactured as a truck but later on it became an extra large SUV which was preferred by the families. It offers comfortable sitting for up to nine persons and has a large cargo capacity. It is available in both light and heavy duty versions. For such a big size SUV its acceleration is good. It has a good suspension system. In 1992 the makers of the car made some changes and introduced a sleeker design and better interiors, whereas its earlier generation had a long uninterrupted run from 1973 to 1991. This generation lasted from 1992 to1999 but even during this period some improvements were made from time to time, for example its four-wheel drive was upgraded and a new dashboard was introduced. The next generation was launched in 2000 which lasted till 2006. During this period a four-wheel steering system was introduced and the cabin was improved. The current generation, started in 2007, has a better chassis, provides more comfortable ride, has better handling quality, and an upgraded safety system.

In a large sized SUV its front grille is one of the most visible parts. To improve the looks of car sometimes new grilles are installed. Through these grilles you can give a distinct, customized look to your car. A number of Suburban grille options in various styles are available in the market. These are generally made of aluminum or stainless steel. Aluminum is light and strong, and it lasts long and is resistant to corrosion. As it is malleable it can be easily shaped to any design or style. Stainless steel is very strong, and resists rust. ABS plastic grilles are also in use, which are comparatively cheaper. There are grilles which can be attached on the top of the existing grille. These can be easily installed. There are others which are installed after completely removing the existing grille.

You can have an enjoyable ride in Suburban with your family and friends. A stylish new Suburban grille will provide something for onlookers to look at. You can see the latest Suburban grille at www.ilovebodykits.com

.

About the Author

Louie Liu has been in the car aftermarket products industry for 5years. He specializes in body kits, headlights, cold air intakes & other aftermarket products. You can learn more about a Lancer grille and other Grilles at his site www.ilovebodykits.com.

Honda civic 2001 difference JDM and USDM?

hi was wondering the main differences between the JDM and USDM 2001 honda civic sedan. i have a civic with a D15Y4 engine and would liek to know wat r some of the differences in th look and the features.Also i would like to know wat i can look for on my civic to know rightaway if its a JDM or USDM. BY the way my car came from singapore. Also i have been lookin gfor the complete engine spec for my D15y4 but cant seem to find it. IS there an engine with the exact built but a different code?

thanks

Those years 2001-2005 there was nothing special about the 4door Civic even in Japan so its its exactly like yours. Here is a link to a page with whole bunch of builds, just click on the car picture and it will take you to the page where the person has more pictures of their build and what parts they used.

Shadowen Wins SCCA GT-Lite National Championship
ELKHART LAKE, Sept. 24, 2010: Peter Shadowen, of Loxahatchee, Fla., captured his first National Championship after a fierce battle with Jim Dentici, of Oconomowoc, Wis., in the GT-Lite class race at the SCCA National Championship Runoffs Presented by Subway at Road America.

Thanks for visiting!